Electrician Near Me Across All Five NYC Boroughs

Dispatched from our headquarters at 155 Wooster St in SoHo, Energize NYC provides 24/7 licensed and insured electrical contracting across all five New York City boroughs. Whether you need an emergency phase-leg repair, a 200-amp service upgrade, co-op remodeling under board alteration rules, or a commercial 3-phase build-out, our master electricians handle every DOB permit, Con Edison load letter, and final sign-off. Select your borough below to view local neighborhoods, ZIP codes served, and same-day dispatch coverage.

We maintain active service trucks across Manhattan, Brooklyn, Queens, the Bronx, and Staten Island with 60-to-90-minute emergency response and scheduled flat-rate installations.

Every borough presents distinct electrical infrastructure challenges, from 120/208V high-rise network risers in Manhattan to cloth-insulated BX branch wiring in Brooklyn brownstones and 60-amp fuse panels in Queens and the Bronx. Explore our dedicated borough pages below for neighborhood-level support:

• Electrician in Manhattan: Serving SoHo, Tribeca, Midtown, Upper East Side, Upper West Side, Harlem, Financial District, and all ZIP codes from 10001 to 10282.
• Electrician in Brooklyn: Serving Williamsburg, Park Slope, Brooklyn Heights, DUMBO, Bushwick, Bay Ridge, Flatbush, and all ZIP codes from 11201 to 11249.
• Electrician in Queens: Serving Astoria, Long Island City, Flushing, Jamaica, Forest Hills, Bayside, Ridgewood, and all ZIP codes from 11101 to 11694.
• Electrician in the Bronx: Serving Riverdale, Fordham, Pelham Bay, Hunts Point, Morris Park, Mott Haven, Throggs Neck, and all ZIP codes from 10451 to 10475.
• Electrician on Staten Island: Serving St. George, Todt Hill, Great Kills, Tottenville, New Dorp, Mid-Island, and all ZIP codes from 10301 to 10314.

We wire pre-war co-ops, brownstones, row houses, detached homes, multi-family walk-ups, offices, retail storefronts, and warehouses in all five boroughs. Across the five boroughs, each building type gets a service size, voltage, and wiring method matched to how it was built.

Manhattan high-rises and co-ops usually run 120/208V network service through shared risers, so we confirm riser capacity and board alteration rules before ordering any panel. Brooklyn brownstones and Queens row houses often hide cloth-insulated BX wiring and 60A or 100A services behind plaster, which we replace with MC armored cable or EMT conduit and 200A copper-bus panels. Bronx multi-family buildings depend on shared meter banks that need balanced feeders and clearly labeled tenant circuits, while detached Staten Island homes need weatherproof meter pans, surge protection, and generator-ready panels.

Offices and shops in every borough need 3-phase distribution, emergency lighting, and after-hours work that fits building management rules. We submit COI paperwork, file DOB permits, and coordinate Con Edison approvals so projects open on schedule. Send your floor plan through our contact page for a written quote within one business day, or read about cable methods on our electrical wiring page.

From apartment renovations and 200A service upgrades to Level 2 EV chargers and standby generators, we cover every electrical need across all five boroughs with licensed crews and upfront pricing.

In every borough the sequence is the same: load calculation, DOB filing, any Con Edison approval, and then one scheduled outage to swap the panel or add the charger. Wherever you are in the city, most home jobs wrap up in a single day, with the inspection to follow.

Upgrading a panel means swapping the sub-panel or service equipment for a modern 120/208V or 120/240V load center, regrounding and bonding to NEC Article 250, and adding AFCI and GFCI breakers where code calls for them. Our electric panel upgrades and circuit breaker installation teams schedule shutdowns with your super and neighbors, and you get one written price up front with no add-ons after filing.

In any borough, a Level 2 charger gets a dedicated 50A circuit and a load check first, so the extra demand stays within what the service can carry. Across the city, our EV charging installation and Tesla charger installation teams wire garages, driveways, and townhouses. For commercial spaces we run EMT conduit, set 120/208V panels, and plan lighting installation around building rules and opening hours. We finish by testing and labeling every circuit and showing you breaker sizes, charger settings, and shutoffs.

Wherever you live in the city, flickering lights, a burning smell, hot outlets, a humming panel, or a breaker that keeps tripping means it is time to call. Whichever borough you live in, if you notice any of these, shut that circuit off and call a licensed electrician the same day.

Heat is the real danger. A warm cover plate or a discolored outlet usually traces back to a loose terminal or an overloaded 15A circuit, and that heat can build inside older plaster walls for hours. Buzzing behind a panel door is often a breaker or bus connection wearing out, and Federal Pacific and Zinsco panels anywhere in the city should be replaced regardless of how they act. These faults turn up most in pre-war apartments, brownstones, and older row houses that still run on original wiring, often after a new appliance is plugged in.

Never treat a tripping breaker as something to keep resetting. Something is wrong on that circuit, whether an overload, a short, or a ground fault, and forcing it back on heats the wiring further. Every visit includes clamp meter and thermal camera testing before parts are replaced, plus a GFCI check in kitchens and bathrooms, by our electrical repair team. When a violation notice triggered the call, our electrical code violations team resolves the cause and files the sign-off. You get photos, meter readings, and a ranked repair list in writing, so a board, landlord, or manager can approve and track each fix.

In any borough we handle the DOB NOW: Build permit, assemble the co-op board or landlord approval package, and book the final inspection. A single signed authorization covers every filing we submit for your property, in any borough.

Every borough requires a permit for new circuits, panel replacements, and EV charger circuits. Our office drafts the one-line drawing and load calculation, submits them under our master license, and follows every approval across the city. Boards and managers typically ask for the alteration agreement, the scope of work, and a COI before they approve, so we prepare that package and book any Con Edison shutdown at the same time to save a second visit.

At the end of the job, a DOB inspector reviews grounding, bonding, conductor sizing, and overcurrent devices, and we are on site for that visit. Commercial buildings may also owe yearly lighting compliance, and our Local Law 88 team completes the upgrades and paperwork. At the end you get the sign-off and certificates together, ready for a board, lender, or buyer. Ready to start? Contact Energize NYC and we will map out the permit steps for your borough first.